Skip to main content
#
ALLOY HARDFACING

Rendering and Processing Equipment
About Us
New Processing Equipment
REMANUFACTURED EQUIPMENT
MECHANICAL SHAFT SEALS
Reman Batch Cooker
Remanufactured Continuous Cookers
Used Equipment
INSTALL
All Alloy Products
Alloy HPHD
Batch Rendering Equipment
BLOOD PROCESSING EQUIPMENT
Cooking & Draining
CONDENSING
Continuous Rendering Equipment
DEWATERING
DRYING
FAT PURIFICATION
Feather & Hair Hydrolyzing
FINISHED STORAGE
GRINDING AND SCREENING
ODOR CONTROL
PRESSING
PROCESS CONTROL
RAW MATERIAL & GRINDING 2
RAW PUMPS
UCO Process
WASTEWATER TREATMENT
Process Navigator
Batch Reshelling
GRATT CENTRIFUGES
GRATT DAF SYSEMS
GRATT DRYING SYSTEMS
GRATT
Parts
Engineering & Information
Engineering Calculation Resources
Service Offering
Batch Cooker Application Sheet
BIN APPLICATION SHEET
Blood APP
Cook and Drain Applications Sheet
Continuous Cooking Application
Condensing and Heat Recovery
COOLING BIN APPLICATION
DEWATERING PRESS APPLICATION SHEET
Drying APP
FAT PURIFICATION APPLICATION SHEET
Feather and Hair Application Sheet
Grind And Screen APP
Mechl Seal App
NEW PLANT APP
Perc Pan App
PRESSING APP
Raw Feather Bin Application
Raw Material Grinding App
Raw Pumps App
Screw Press Application
Storage Application Sheet
Scrubbing App
Wastewater App
Applications Information
Videos
Photo Library
REMANUFACTURED Gallery
Library of Resources
Alloy ALL-manac Blog
Contact Us
Careers at Alloy
Site Map

  
REMANUFACTURED EQUIPMENT

REMANUFACTURED GALLERY LINK

Alloy offers a wide range of process equipment on a Remanufactured basis. Remanufactured equipment is completely disassembled, all components inspected, repaired, or replaced with new.  The end result is equipment that carries the same one-year warranty as new equipment at savings that range 30 to 40%.

Check with Sales or the Applications Group for current availability.

 

The Alloy remanufacturing process begins with a detailed visual inspection of the piece of equipment and all components to determine a general condition of the piece. Following this overview, the equipment is disassembled down to the component level and each item is cleaned, inspected and measured to determine its condition.

Following the detailed inspection, each component is determined to be either within tolerance or not. If the item is not within tolerance it is then determined whether the piece needs to be rebuilt to tolerance or replaced with new. A bill of materials is then generated and manufacturing or repair orders written starting the manufacturing process.

As components arrive or are manufacturing is completed things they are stagged for reassembly. Once assembled the piece is started and this mechanical turnover is observed, adjustments made if required and a final inspection is performed. 

The result is a piece of equipment that is not merely "rebuilt" but remainufactured. Alloy remanufactured equipment carries the same warranty and guarantee as a new piece of equipment at a lower investment.

CONDENSERS

Alloy has supplied condensing solutions to industry for 50 years. We supply Remanufactured and New units, both Air and Shell and Tube Condensers as well as complete systems. Give us a call to discuss your condensing needs.

Alloy offers Remanufactured Batch cookers.
Our cookers are designed and reconstructed to provide exceptional cooking efficiency and extended useful life at investments that are more than just competitive.

REMANUFACTURED CONTINUOUS EQUIPMENT

Alloy offers Remanufactured Continuous Cookers as well as other parts of the continuous process. Alloy Remanufactured products offer exceptional value and rapid ROI.

  • Belt Conveyors

  • Screw Conveyors

  • Blow Tanks

  • Bucket Elevators

  • Lamella Pumps

  • Ramveyor Piston Pumps

  • Vertical Conveyors

  • Pneumatic Systems

DRYERS

Steam Tube Dryers as small as 600 ft2/1,800 pounds per hour evaporation or as large as 4,500 ft2/13,500 pounds per hour evaporation.

Alloy offers equipment for every step of your feather process including:

  • Receiving Bins 
  • Conveyors
  • Dewatering Screens
  • Dewatering Press
  • Hydrolyzers 
  • Hydrolyzed Bins
  • Scalper Screen 
  • Dryers
  • High Protein High Digestibility System (HPHD)

Whether your process vessel operates under pressure or vacuum, the Alloy mechanical seal is a cost effective solution to lost product, shaft leakage, and shaft wear. Alloy seals can take the pressure.

PREBREAKERS

Makes typically available: Anco, Rietz

Sizes typically available: 12", 15", 24"

Drive Options: Belts and Sheaves or Gearbox

SCREW PRESSES

Alloy has been remanufacturing Expellers for over Sixty Years. We know these machines inside and out. We can provide you this flexible, reliable machine at an affordable investment.


Site Mailing List 
Evolving to meet YOUR needs......

ALLOY HARDFACING and ENGINEERING CO., INC.
20425 Johnson Memorial Drive, Jordan, Minnesota 55352 USA

Phone: 1.952.492.5569  1.800.328.8408
Email:
salesinfo@alloyhardfacing.net
FAX: 1.952.492.3100
6:00 am to 5:00 pm M-F CENTRAL TIME
 

Voice English
+1-800-328-8408
+1-952-492-5569
Email
salesinfo@alloyhardfacing.net
 Para Hablar en Español Marque
+506.7019.2800